Global Sales Contact List

Contact   A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Press Release

EMC in Major Storage Performance Breakthrough; First With Enterprise-Ready Solid State Flash Drive Technology

Market-leading Symmetrix DMX Systems to Feature Newest Flash-based Technology for Unprecedented Performance and Energy Efficiency

HOPKINTON, Mass., January 14, 2008 - 

HOPKINTON, Mass. – January 14, 2008 – EMC Corporation (NYSE:EMC), the world leader in information infrastructure solutions, today became the first enterprise storage vendor to integrate flash-based solid state drives (SSDs) into its core product portfolio. Solid state flash drives utilize flash memory to store and retrieve data, yielding response times that are an order of magnitude faster than the fastest hard disk drives and require dramatically less power to run. The EMC® Symmetrix® DMX-4 storage system is the only enterprise storage system available on the market today to leverage this technology, which has been tested by EMC for the past year, to deliver ultra-high performance for mission-critical applications.

The flash drives for the Symmetrix DMX-4 system have been purpose built to EMC’s exacting specifications and use single-layer cell (SLC) flash technology combined with sophisticated controllers to achieve ultra fast read/write performance, high reliability and data integrity. They have been tested and qualified to withstand the intense workloads of high-end enterprise storage applications. Continuing a pace of innovation that has made Symmetrix the market-leading enterprise storage platform for more than a decade, EMC has further optimized the Symmetrix DMX-4 operating software to take advantage of the full power and value that flash storage technology brings to high-performance storage environments, including the ability to easily provision, manage, replicate and move data between flash drives and traditional Fibre Channel and SATA disk drives in the same array.    

Because there are no mechanical components in flash drives, they require less power. In a storage array, flash drives can store a terabyte of data using 38 percent less energy than traditional mechanical disk drives. It would take 30 15,000 RPM Fibre Channel disk drives to deliver the same performance as a single flash drive, which translates into a dramatic 98 percent reduction in power consumption in a transaction-per-second comparison.

“EMC is the first enterprise infrastructure player to incorporate flash disk into their arrays, which should give them a huge performance advantage at the very sector of the market that always seems to need more and more,” said Steve Duplessie, Senior Analyst, The Enterprise Strategy Group, Inc. “If it creates as big a gap in real life transaction processing shops as it does on paper, this could very well be one of those killer advantages that only appear every 10 to 15 years.”

Flash storage technology is ideally suited to support applications that need to process massive amounts of information very quickly, such as currency exchange and electronic trading systems, real-time data feed processing, mainframe transaction processing, and many others. Storage systems with enterprise-class flash drives can deliver single-millisecond application response times, up to 10 times faster than those with traditional 15,000 RPM Fibre Channel disk drives. With flash drive technology in a Symmetrix DMX-4 storage system, a credit card provider, for example, could process its fraud detection information more quickly, clearing up to six times more transactions in the same amount of time it took to previously process a single transaction.

This new solid-state storage tier, “tier zero,” is fully supported by the Symmetrix software management suite, enabling storage administrators to simplify the provisioning of all of their storage tiers with advanced management tools including Dynamic Cache Partitioning, Virtual LUNs, Quality of Service Manager, and now Virtual Provisioning (see separate press release for details) to simplify overall management and application performance.

With new support for one terabyte SATA II disk drives on Symmetrix DMX-4 systems, EMC is further improving storage density while enhancing energy efficiency (see separate press release for details). The Symmetrix DMX-4, with support for flash drives, Fibre Channel disk drives and SATA disk drives, offers the broadest range of ‘in the box’ storage tiering options to enable the consolidation of all application tiers within a single system. By aligning data availability, service level requirements and software functionality with capacity and cost considerations through tiered storage, Symmetrix DMX-4 delivers the best performance, resiliency and energy efficiency available in the industry today.

“For years, magnetic disk drive technology has defined performance boundaries for customers’ mission critical storage environments,” said David Donatelli, President, EMC Storage Division. “With this announcement, EMC has again revolutionized the storage industry. The introduction of flash drive technology builds on EMC’s long history of storage industry firsts, including the pioneering use of small form factor disk drives and ATA disk drives in enterprise storage systems. Then as now, EMC is helping customers gain a competitive advantage and tackle information challenges that no other vendor’s technology can.”

Availability

EMC plans to offer flash drives in 73 GB and 146 GB capacities for the Symmetrix DMX-4 platform beginning later in Q1 2008.

About EMC

EMC Corporation (NYSE: EMC) is the world’s leading developer and provider of information infrastructure technology and solutions that enable organizations of all sizes to transform the way they compete and create value from their information. Information about EMC’s products and services can be found at www.EMC.com.

Press Contacts

Colin Boroski
508-293-6321
boroski_colin@emc.com

EMC and Symmetrix are registered trademarks of EMC Corporation. All other trademarks are the property of their respective owners.

This release contains "forward-looking statements" as defined under the Federal Securities Laws. Actual results could differ materially from those projected in the forward-looking statements as a result of certain risk factors, including but not limited to: (i) adverse changes in general economic or market conditions; (ii) delays or reductions in information technology spending; (iii) risks associated with acquisitions and investments, including the challenges and costs of integration, restructuring and achieving anticipated synergies; (iv) competitive factors, including but not limited to pricing pressures and new product introductions; (v) the relative and varying rates of product price and component cost declines and the volume and mixture of product and services revenues; (vi) component and product quality and availability; (vii) the transition to new products, the uncertainty of customer acceptance of new product offerings and rapid technological and market change; (viii) insufficient, excess or obsolete inventory; (ix) war or acts of terrorism; (x) the ability to attract and retain highly qualified employees; (xi) fluctuating currency exchange rates; and (xii) other one-time events and other important factors disclosed previously and from time to time in EMC's filings with the U.S. Securities and Exchange Commission. EMC disclaims any obligation to update any such forward-looking statements after the date of this release.

Notes:
Connect with EMCConnect with EMC
Need help immediately? EMC Sales Specialists are standing by to answer your questions real time.
Use Live Chat for fast, direct access to EMC Customer Service Professionals to resolve your support questions.
Explore and compare EMC products in the EMC Store, and get a price quote from EMC or an EMC partner.
We're here to help. Send us your sales inquiry and an EMC Sales Specialist will get back to you within one business day.
Want to talk? Call us to speak with an EMC Sales Specialist live.